Compact and Lightweight Design
High Vertical Resolution
Low Noise Emission
Flat Array Sodar MFAS

The Scintec MFAS is a versatile acoustic profiler for the measurement of wind and turbulence up to 1000 m above the ground. The operation is based on the reflection of acoustic pulses at temperature inhomogeneities in the air with subsequent doppler analysis. The instrument can replace towers, tethered balloons or radiosondes at a fraction of the operational costs. With its small size and low weight, the system can be easily transported and installed. Its low power consumption also facilitates the unmanned operation in remote areas.

MFAS can be further upgraded by RASS Extensions (RAE2 and windRASS) for precise measurements of temperature profiles. In addition to temperature, the windRASS model also performs wind measurements with the combined radio-acoustic measurement technique, which ensures a robust measurement that works anywhere and anytime.

maximum range up to 1000 m
vertical resolution down to 10 m
compact and lightweight design
RASS Extensions available (RAE2 and windRASS)
powerful and easy-to-use operation software
multi-frequency technology (sequential and polyphonic)
simultaneous multi-beam technology
fully-automated self-test
low noise-emission with active tapering
various remote access options available

Data output (includes but is not limited to)
Wind speed and direction
Temperature (with RASS Extension)
Standard deviations of wind components
Turbulence intensity for wind energy applications
Wind shear for airport applications
Standard deviation of wind directions (sigma phi, sigma theta) and stability class for air quality applications
Structure parameter of temperature C T2 for wave propagation studies
Turbulent kinetic energy
Eddy dissipation rate
Mixing height estimation
Data quality (signal-to-noise ratio)
Data confidence (consensus level)
Wind roses
Frequency distribution of wind speeds for power-curve calculations
Basic Specifications
No. of antenna elements
Electric (acoustic) output power
50 W (7.5 W)
maximum, selectable
Frequency range
1650 to 2750 Hz
auto-configuration or user defined
sequential and polyphonic
auto-configuration or user defined
Multi-beam operation
up to 9 beams in two configurations
auto-configuration or user defined
Beam angles
0°, ±9°, ±16° or 0°, ±22°, ±29°
No. of range gates
maximum setting
Vertical resolution
10 m
finest setting
Minimum height
20 m
depending on settings, environment and atmosphere
Maximum height
1000 m
depending on settings, environment and atmosphere
Averaging time
1 to 60 min
user defined
Accuracy of horizontal wind speed
0.1 to 0.3 m/s
depending on mode, average over varying conditions
Accuracy of vertical wind speed
0.025 to 0.1 m/s
depending on mode, average over varying conditions
Accuracy of wind direction
< 1.5°
at wind speeds > 2 m/s
Measurement range of horizontal wind speed
0 to 50 m/s
Measurement range of vertical wind speed
-10 to 10 m/s
Operating conditions
temperature: -35 to +55 °C (-30 to +130 °F); relative humidity: 0% to 100%
Power requirement DC operation
12 or 24 VDC, 20 to 50 W
average, depending on settings
Power requirement AC line operation
100 to 240 VAC, 45 to 90 W
average, depending on settings
74 x 72 x 20 cm
Acoustic Antenna without Enclosure
32 kg
Acoustic Antenna without Enclosure
Software Specifications
Operating system compatibility
Windows 11, Windows 10, Windows Server 2022, Windows Server 2019.
System monitoring
Remotely monitor the system status in an automatic way via the SNMP interface. Notification about system status can also be sent to user via SMS.
Control and configuration
Graphical user interface with auto-configuration functionality, no manual editing of configuration files required.
Real-time display
Wind barb and vector plots, profile plots, time vs. height color plots, wind roses, raw spectra plots and tabular outputs.
Displays offline
Same as displays in real-time.
Real-time data export
Network output a via FTP, TCP, UDP or shared folder.
Reprocessing of data
Reprocess of time series, spectra, moments or main data, fully configurable through graphical user interface.
Echo detection
Automatic fixed echo detection and correction.
Quality control
Thorough data confidence and data quality checks.
Remote control capability
Measurement control and change of configuration via LAN, Radio or GSM Modern.
Hardware self-test
Extensive self-test capability, which runs in a fully automatic way.
RASS Extension RAE2

The Scintec RAE2 RASS Extension upgrades any Sodar models (SFAS, MFAS or XFAS) to allow precise measurements of temperature profiles in the atmospheric boundary layer.

windRASS Extension
for SFAS and MFAS

The Scintec windRASS Extension upgrades the Sodar models SFAS or MFAS to work in radio-acoustic mode for precise measurements of both wind and temperature.

Power Supply MFAS

For operation of a MFAS system with AC power.

Power Supply for Antenna Heating MFAS

For operation of MFAS Antenna Heating with AC power.

Isolating DC Power Adapter Type L, 9-36 VDC
for SFAS and MFAS

This power adapter allows for DC operation of SFAS or MFAS.

DC Power Cable Antenna Heating, 24 VDC
for SFAS and MFAS

This power cable allows for DC operation of SFAS Antenna Heating and MFAS Antenna Heating.

Acoustic Enclosure Small MFAS

The small acoustic enclosure is directly mounted at the top of MFAS antenna. It consists of four panels that are equipped with sound absorption linings.

Acoustic Enclosure Large MFAS

The large acoustic enclosure is placed on the ground surrounding the MFAS antenna. It consists of sixteen panels that are equipped with sound absorption linings.

MFAS Support Stand
with Electronic Compartment and Acoustic Enclosure

This accessory consists of a support stand for the MFAS Antenna with an electronic compartment and an acoustic enclosure on the top, which is equipped with sound absorption linings.

RS485 Converter Set

This set of RS485 Converters permits to extend the length of the data cable between a SFAS, MFAS or XFAS system and the user PC.

RS485 Cable, 100-500 m

This extension cable (100-500 m) can be used in conjunction with the RS485 Converter Set. (The wood cable reel is not included in this product)

Related Products
Radar Wind Profiler LAP®3000 - Standard Antenna

This is the standard model for reliable and continuous wind measurements with proven performance.

Radar Wind Profiler LAP®3000 - Large Antenna

The larger antenna aperture of this model provides the highest performance and clutter resilience that the most critical applications demand.

Flat Array Sodar SFAS

SFAS is a high-performance acoustic Wind Profiler with a compact and lightweight design, which provides the highest spatial resolution among the FAS series.

Flat Array Sodar XFAS

XFAS is a long-range acoustic Wind Profiler optimized for the measurement of wind and turbulence up to boundary layer height.

AWAIRE® Aviation

AWAIRE Aviation is a hardware, software and service package which is designed to provide the most complete, accurate and reliable information about upper winds and temperatures and to bring this to airport controllers, managers, meteorologists and pilots. AWAIRE Aviation uses a variety of the most advanced sensing technologies to continuously measure all relevant wind, temperature and turbulence parameters in the area of the departure and climb paths with high distance resolution, precisely and in near real-time. This includes wind speed and direction relative to the airplane as well as both, turbulence (EDR), vertical wind shear and density altitude.

AWAIRE® Air Quality

AWAIRE® Air Quality is a hardware, software and service package which provides a complete solution for monitoring and forecasting the dispersion of pollutants in industrial areas and their surroundings. AWAIRE® AQ receives all inventory data, applies wind and temperature profilers and uses surface meteorological sensors to continuously measure all relevant atmospheric boundary layer parameters. All data is filtered, processed and ingested in a pollutant dispersion model, supported by an atmospheric forecast model. AWAIRE® AQ can also be also used to simulate scenarios. The results are shown in a web based interface.